Was in school today to help the rag and flag team with their float-building efforts, and was given the task of cutting up the aluminium drinks cans that we collected over the semester. After spending a few cans to test, I came up with this guide to cutting the cans.

1. Place the can opener on the top of the can, with the blade just below the rim.

2. Press hard to make an opening to the can. Put the can on a static surface to facilitate better cutting.

3.Turn the can opener knob in an anti-clockwise manner. You should be able to see the gap between the lid and the can opening up.

4. Remove the can opener and the lid after you have turned the can opener round the can once. Sometimes the end point of the turn might not be in line with the start point. When that happens, gently pull the lid away from the can to remove the lid.

5. A nicely cut can!
Caution: Always wear protective gear such as gloves when you are opening the can as the cut up can edges can be very sharp and can cause serious injuries.
Have fun cutting cans!